Córdova, J.L., “Additive Manufacturing of Centrifugal Impellers for Solid Oxide Fuel Cell Anode Offgas Recycle Blowers.” ASME Turbo Expo Technical Proceedings (2022). https://doi.org/10.1115/GT2022-83489 A form of laser powder bed fusion (LPBF) 3D printing has been used to manufacture the impellers of anode offgas recycle blowers (AORBs) for solid oxide fuel cell (SOFC) applications. The material […]
Wooding, R., Lea, H., and Córdova, J.L., “Development of Oil Free Centrifugal BlowerAs Enabling Technology for Solid Oxide Fuel Cell Anode Gas Recycling.” ASME Turbo Expo Technical Conference Proceedings (2022). https://doi.org/10.1115/GT2022-82294 Broad commercialization of solid oxide fuel cells (SOFCs), requires anode offgas recycle blowers (AORB) that are specifically designed for handling the challenging operating conditions […]
Lea, H., Wooding, R., Kuhr, S., Rotella, J., and Córdova, J.L., “Characterization of Properties of Laser Powder Bed Fusion 3D-Printed Inconel 718 for Centrifugal Turbomachinery Applications.” ASME Turbo Expo Technical Conference Proceedings (2022). https://doi.org/10.1115/GT2022-83474 This paper presents the results of a comprehensive effort to characterize the properties of Inconel 718 produced by a form of […]
Heshmat, H. and Walton II, J.F., “On the Integration of Hot Foil Bearings into Gas Turbine Engines: Theoretical Treatment.” ASME Turbo Expo Technical Conference Proceedings (2019). http://doi.org/10.1115/GT2019-91710 To achieve high power density Gas Turbine Engines (GTEs), R&D efforts have strived to develop machines that spin faster and run hotter. One method to achieve that goal […]
No. 10,094,284 | High Effectiveness Low Pressure Drop Heat Exchanger A heat exchanger in the form of a honeycomb with a plurality of rectangular or otherwise polygon in cross-section passages which share common walls with adjacent passages. Two or more flow paths each comprises a plurality of serially connected passages. Each flow path passes through […]
Heshmat, H., Walton II, J.F. and Nicholson, B.D., “Ultra-High Temperature Compliant Foil Bearings – The Journey to 870°C and Application in Gas Turbine Engines: Experiment.” ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition Proceedings (2018). http://doi.org/10.1115/GT2018-75555 In this paper, the authors present the results of recent developments demonstrating that ultra-high temperature compliant foil bearings […]
Heshmat, H., Walton II, J.F. and Córdova, J.L., “Technology Readiness of 5th and 6th Generation Compliant Foil Bearing for 10 MWE s-CO2 Turbomachinery Systems.” Paper presented at the 6th International Supercritical CO2 Power Cycles Symposium, Pittsburgh, PA, March 2018. http://sco2symposium.com/www2/sco2/papers2018/components/072_Paper.pdf The availability of bearings capable of sustaining long life and maintenance‐free operation in the extreme […]
Heshmat, H. and Walton, J.F., “A Bladeless Turbocompressor Concept: Shear Driven Gas Compression with Deformable Structures—Part I Experimental Proof of Concept.” ASME Power & Energy Conference Proceedings (2017). http://doi.org/10.1115/POWER-ICOPE2017-3374 A novel concept for shear flow driven gas compression that could enable next generation turbomachinery has been designed and experimentally demonstrated. In order to achieve this, […]
Heshmat, H., and Córdova, J.L., “A Bladeless Turbocompressor Concept: Shear Driven Gas Compression with Deformable Structures—Part 2 Operating Principles and Theory.” ASME Power & Energy Conference Proceedings (2017). http://doi.org/10.1115/POWER-ICOPE2017-3375 The theory underlying a novel method of gas compression driven by shear flow for next generation turbo-machinery is presented. The concept is based on the conversion […]
No. 9,309,925 | High Speed Machining Center A micro-machine powered by an electric motor and/or a gas turbine drive and capable of rotation speeds to 1,500,000 rpm is disclosed. The micro-machine may include a rotating spindle which is constructed, balanced and arranged to provide a tool holder function and may incorporate a portion of the […]
Córdova, J.L., and Heshmat, H., “Development of a Ceramic Heat Exchanger for Application as Solid Oxide Fuel Cell Cathode Air Preheater.” ASME Power & Energy Conference Proceedings (2016). http://doi.org/10.1115/POWER2016-59333 A ceramic heat exchanger with high effectiveness and low-pressure drop is being developed for application as a cathode air preheater for a Solid Oxide Fuel Cell […]
Heshmat, H. and Walton II, J., “Lubricant Free Foil Bearings Pave Way to Highly Efficient and Reliable Flywheel Energy Storage System.” ASME Power & Energy Conference Proceedings (2016). http://doi.org/10.1115/ES2016-59350 Advanced compliant foil bearings capable of operating in low ambient pressures associated with soft vacuum are now paving the way to a new type of flywheel […]
Heshmat, H. and Walton II, J.F., “Starved Hydrodynamic Gas Foil Bearings – Experiment, Micromechanical Phenomenon and Hypotheses.” STLE Tribology Frontiers Conference Proceedings, ASME. J. Tribology 138 no. 4 (March 2016). http://doi.org/10.1115/1.4032911 In this paper, a hypothesis for the operating tribological mechanisms and phenomena occurring in compliant surface gas foil bearings subjected to low ambient pressure […]
Jahanmir, S., Tomaszewski, M.J. and Heshmat, H., “Ultra-High-Speed Micro-Milling of Aluminum Alloy.” ASME International Mechanical Engineering Congress and Exposition Proceedings, 15 (2015). http://doi.org/10.1115/IMECE2015-50053 Small precision parts with miniaturized features are increasingly used in components such as sensors, micromedical devices, micro-fuel cells, and others. Mechanical micromachining processes, e.g., turning, drilling, milling and grinding are often used […]
No. 9,151,322 | Foil Journal Bearing Application to High Speed Machining Center A foil journal bearing applicable to high speed machining and grinding machines for machining microscopic features. A single foil is secured to and supported by a hollow, generally cylindrical, housing. The foil has a length substantially equal to twice the interior circumference of […]
Hunsberger, A., Walton II, J.F. and Heshmat, H., “Debris Tolerant Compliant Foil Bearings for High-Speed Turbomachines.” ASME Turbo Expo, Turbine Technical Conference and Expo Proceedings, 8 (2015). http://doi.org/10.1115/GT2015-43712 High-speed turbomachines such as air cycle machines (ACM), auxiliary power units (APU) and turbogenerators as used in aerospace systems operate in hot and harsh environments. Such operating […]
Córdova, J.L., Walton II, J.F., and Heshmat, H., “High Effectiveness, Low Pressure Drop Recuperator for High Speed and Power Oil-Free Turbogenerator.” ASME Turbo Expo, Turbine Technical Conference and Exposition Conference Proceedings, 8 (2015). http://doi.org/10-1115/GT2015-43718 Development of a compact radial recuperator prototype for a previously demonstrated 8 kW turboalternator has been completed. Its novel geometry has […]
No. 8,801,290 | Foil Journal Bearing Application to High Speed Machining Center A foil journal bearing applicable to high speed machining and grinding machines for machining microscopic features. A single foil is secured to and supported by a hollow, generally cylindrical, housing. The foil has a length substantially equal to twice the interior circumference of […]
Heshmat, H., Walton II, J.F., and Hunsberger, A.Z. “Oil-Free 8 KW High-Speed and High Specific Power Turbogenerator” GT2014-27306, Proceedings of the ASME Turbo Expo 2014: Power for Land, Sea and Air, June 16-20, 2014, Dusseldorf, Germany. In the paper the authors will present the design and preliminary test results for a high specific power (i.e., […]
Lund, J. W., Smalley, A.J., Tecza, J.A., and Walton, J.F., “Squeeze Film Damper Technology: Part I – Prediction of Finite Length Damper Performance,” ASME International Gas Turbine and Aeroengine Congress and Exposition, Paper No. 83-GT-247.
Walton, J.F., Zorzi, E. And Cunningham, R., “Power Turbine Dynamics – An Evaluation of a Shear Mounted Elastomeric Damper,” ASME International Gas Turbine and Aeroengine Congress and Exposition, Paper No. 83-GT-228. As an alternative to the more conventional squeeze-film bearing damper designs, a Viton-70 shear-mounted, elastomeric damper was built and tested in a T-55 power […]
Awarded to Dr. Hooshang Heshmat
No. 8,602,653 | Foil Thrust Bearing Application to High Speed Machining Center A foil thrust bearing applicable to high speed machining and grinding machines for machining microscopic features. Top foil segments are circumferentially spaced relative to a rotating runner for engagement by the runner when the bearing is mounted to bearing support runner rotation. Bump […]
Heshmat, H., Hunsberger, A.Z., Ren, Z., Jahanmir, S. and Walton, II, J.F. “Oil-Free Bearings and Seals for Centrifugal Hydrogen Compressor,” (2013) Tribology Online, Japanese Society of Tribologists (8), 1, ISSN 1881-2198. Deployment of a safe, efficient hydrogen production and delivery infrastructure on a scale that can compete economically with current fuels is needed in order […]
Walton II, J.F., Heshmat, H. and Tomaszewski, M.J. “Power Loss in High-Speed Micro Turbomachinery – An Experimental Study” GT2012-69558, Proceedings of ASME Turbo Expo 2012: Power for Land, Sea and Air, June 11-15, 2012, Copenhagen, Denmark. In the paper the authors present the results of a study to investigate the windage and foil bearing losses […]
H. Heshmat, J. Walton, and S. Jahanmir, “Evaluation of a New Coating for Application to Ramjet Engine,” ASME-IGTI, Paper No. GT2012-68725, Copenhagen, Denmark, June 2012 In the present study, the adhesion and thermal characteristics of a new high temperature coating are evaluated. The new Korolon™ 1350A is applied by a conventional spray gun process at […]
S. Jahanmir, “Wear and Lubrication of Ceramics,” Handbook of Tribology and Lubrication, vol.2 Theory and Design, 2nd Edition, R. W. Bruce (Ed.) CRC Press (2012), Chapter 3.
S. Jahanmir, “Surface Integrity in Ultrahigh Speed Micromachining,” 1st CIRP Conference on Surface Integrity, Procedia Engineering, Bremen, Germany January 2012. A new ultrahigh speed micro-spindle was used for micro-milling and micro-grinding at speeds greater than 300,000 rpm. Micro-milling was performed on an aluminium alloy with micro-end-mills ranging in diameter from 50 to 300 μm. The dimensional accuracy […]
Jahanmir, S., Hunsberger, A. and Heshmat, H. “Load Capacity and Durability of H-DLC Coated Hydrodynamic Thrust Bearings,” (July 2011) Journal of Tribology, Volume 133, pp. 031301-1 – 031301-10. Hydrogenated diamondlike carbon (H-DLC) coatings provide excellent wear resistance and low friction for bearing applications. However, the use of such coatings with aqueous lubricants could pose some […]
H. Heshmat, J. F. Walton and S. Jahanmir, “Tribological and Thermal Properties of a New Flexible Ceramic Coating,” Proceedings of STLE Annual Meeting & Exhibition, May 15-19, 2011, Atlanta, GA. In the present study the tribological and thermal properties of a new environmental barrier coating are demonstrated for high temperature applications. The new Korolon™ 1350A, […]
Walton II, J.F. Hunsberger, A.Z., and Heshmat, H. “Design and Analysis of a High Power Density, Low Temperature Waste Heat Recovery System Using an Oil-Free Turboalternator” IMECE 2010-40609, Proceedings of ASME IMECE, November 12-18, 2010, Vancouver, British Columbia, Canada. In this paper the authors will present the design and preliminary test results for a distributed […]
Heshmat, H., Ren, Z., Hunsberger, A.Z., Walton II, J.F. and Jahanmir, S. “The Emergence of Compliant Foil Bearing and Seal Technologies in Support of 21st Century Compressors and Turbine Engines” IMECE2010-40598, Proceedings of ASME IMECE, November 12-18, 2010, Vancouver, British Columbia, Canada. For energy independence to become a reality, whether through the more effective use […]
Heshmat, H. “Innovation is the Key to Sustaining Sustainability” IMECE2010-37432, Proceedings of ASME IMECE, November 12-18, 2010, Vancouver, British Columbia, Canada, Volume 5, pp. 1259-1270. Economic survival and sustainability in the increasingly interconnected global community during the 21st century and beyond will require new and innovative technologies supported by subsequent continuous product improvements that minimize […]
Heshmat, H., Hunsberger, A.Z., Ren, Z., Jahanmir, S., Walton II, J.F. “On the Design of a Multi-Megawatt Oil-Free Centrifugal Compressor for Hydrogen Gas Transportation and Delivery – Operation Beyond Supercritical Speeds” IMECE2010-40575, Proceedings of ASME IMECE, November 12-18, 2010, Vancouver, British Columbia, Canada. Deployment of a safe, efficient hydrogen production and delivery infrastructure on a […]
S. Jahanmir, “Ultrahigh Speed Micromachining,” ASME Manufacturing Science and Engineering Conference Proceedings, Paper No. MSEC2010-34174, Erie PA, October 2010. A new ultrahigh speed micro-spindle has been developed for micromachining that can be used at rotational speeds as high as 500,000 rpm. Since conventional ball bearings or fluid lubricated journal bearings cannot be used at speeds […]
Heshmat, H., Walton II, J.F., Tomaszewski, M.J. and Potgieter, D.J. “Structural Dynamic Design of a Rotating Hydrogen Co-Fired Multi-Fuel External Combustor” Proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air, June 14-18, 2010, Glasgow, UK.
Heshmat, H. and Walton II, J.F. “On the Development of an Oil-Free, High-Speed and High-Temperature Turboalternator” GT2010-22852, Proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air, June 14-18, 2010, Glasgow, UK, Volume 5, pp. 425-432. In the paper the authors will present the design and preliminary test results for a distributed electric […]
Walton, J.F., “Oil-Free Renewable Energy Turbine Generator Systems”; Presented at The IAPG Mechanical & Electrical Systems Working Groups Meeting, Golden CO, May 3-5, 2010
Heshmat, H. and Walton, J.F., “An Advanced High Efficiency Modular, Flywheel Energy Storage System,” Presented at The IAPG Mechanical & Electrical Systems Working Groups Meeting, Golden CO May 3-5, 2010 In the paper the author will present the design and operating test results for a novel energy storage flywheel system. Proof of concept testing of […]
A. Z. Hunsberger, S. Jahanmir, Z. Ren, L. Montessano, “Pre-Clinical Evaluation of MITIHEART® LVAD,” ASAIO Journal, 56 (2010) 135.
S. Jahanmir, H. Z. Ren, H. Heshmat, and M. Tomaszweski, “Design and Evaluation of an Ultrahigh Speed Micro-Machining Spindle,” Machining Science and Technology, 14 (2010) 224-243. A new ultrahigh speed micro-spindle has been developed for micro-milling that can be used at rotational speeds approaching 500,000 rpm. Since conventional ball bearings or fluid lubricated journal bearings cannot […]
The book is aimed at providing the engineering profession with a unified approach to the discipline of lubrication. Whereas, up to the present, the field consisted of several noncontiguous modes of operation – boundary, fluid-film, and dry and solid lubrication – the book introduces a new concept wherein all these disparate modes are shown to […]
S. Jahanmir, “Ultrahigh Speed Micro-Grinding of Dental Ceramics,” Machining Science and Technology, 14 (2010) 430-440. Theoretical models and experimental results on machining of industrial ceramics have shown that machining at high speeds reduces the grit depths of cut, thus reducing the contact forces and resulting in a reduced possibility of detrimental chipping and subsurface machining […]
Ren, Z., Jahanmir, S., Heshmat, H., Hunsberger, A.Z. and Walton II, J.F. “Design Analysis and Performance Assessment of Hybrid Magnetic Bearings for a Rotary Centrifugal Blood Pump,” (July/August 2009) ASAIO Journal, Volume 55, Issue 4, pp. 340-347. A hybrid magnetic bearing system was designed for a rotary centrifugal blood pump being developed to provide long-term […]
Walton, J.F., “An Advanced High-Efficiency Power Generation and Thermal Management System”; Presented at the IAPG Mechanical & Electrical Systems Working Groups Meeting-NAVSEA-SSES Philadelphia – May 4-8, 2009
Awarded to Dr. Hooshang Heshmat
A. Z. Hunsberger, S. Jahanmir, Z. Ren, H. Heshmat, M. J. Tomaszewski, J. F. Walton, “Status of the Magnetically levitated MiTiHeart LVAD,” ASAIO Journal, 55 (2009) 135.
Jahanmir, S., Heshmat, H. and Heshmat, C.A. “Assessment of Tribological Coatings for Foil Bearing Applications,” (2009) STLE Tribology Transactions, Volume 52, No. 2, pp. 231-242. A critical component in oil-free gas foil bearings is the tribological coating system that must be used on the journal/runner and the foil pads to ensure reliable operation during transient […]
Jahanmir, S., Heshmat, H. and Heshmat, C.A. “Evaluation of DLC Coatings for High-Temperature Foil Bearing Applications,” (2009) Journal of Tribology, Volume 131, No. 1, pp. 011301-1 – 011301-11. Diamond like carbon (DLC) coatings, particularly in the hydrogenated form, provide extremely low coefficients of friction in concentrated contacts. The objective of this investigation was to evaluate […]
Jahanmir, S., Hunsberger, A.Z., Ren, Z., Heshmat, H., Heshmat, C.A., Tomaszewski, M.J. and Walton II, J.F. “Design of a Small Centrifugal Blood Pump with Magnetic Bearings,” (2009) Artificial Organs, Volume 33, No. 9, pp. 714-726. Design of a blood pump with a magnetically levitated rotor requires rigorous evaluation of the magnetic bearing and motor requirements […]
Heshmat, H. and Walton II, J.F. “Innovative High-Temperature Compliant Surface Foil Face Seal Development,” AIAA/ASME/SAE/ASEE Joint Propulsion Conference, July 21-23, 2008 Hartford, Connecticut. An innovative compliant surface foil face seal being developed for aerospace applications will be described and discussed in this paper. Due to the requirements of gas turbine applications, this compliant surface face […]
Ren, Z., Hunsberger, A.Z., Jahanmir, S., Heshmat, H. and Walton II, J.F. “Performance Assessment of a Hybrid Magnetic Bearing System for Rotary Centrifugal Blood Pump,” 54th Annual ASAIO Conference, June 19-21, 2008, San Francisco, California. The performance of a proposed hybrid magnetic bearing system for a rotary blood pump is experimentally evaluated. The hybrid magnetic […]
Walton, J.F., Heshmat, H. “A Compact and Efficient 12-Kw Compressor for Automotive Fuel Cell Applications,” ASME 6th International Fuel Cell Science, Engineering and Technology Conference, Denver, Colorado, June 16-18, 2008. A novel concept air handling unit for Fuel cell’s infrastructure which serves as the foundational components has been developed and prototype unit have been tested […]
Heshmat, H., Walton II, J.F. “Development of an 80 Kw Oil-Free, High Speed Blower for Fuel Cell Applications,” ASME 6th International Fuel Cell Science, Engineering & Technology, Conference, Denver, CO, June 16-18, 2008. This paper presents the design and development methodology used to develop an air blower on an integral motor rotor /impeller system, operating […]
Heshmat, H., Walton II, J.F. and Tomaszewski, M.J. “Design, Development and Test of a 30 KW Oil-Free, Turboalternator,” GT208-51514, Proceedings of the 2008 ASME Turbo Expo-Power for Land, Sea & Air, June 9-13, 2008, Berlin, Germany. This paper describes the design procedures and testing program used in the development of a 30 kW single shaft […]
S. Jahanmir, A. Z. Hunsberger, H. Heshmat, M. J. Tomaszewski, J. F. Walton, W. J. Weiss, B. Lukic, W. E. Pae, and C. M. Zappanta, T. Z. Khalapyan, “Performance Characterization of MiTiHeart Rotary Centrifugal LVAD with Magnetic Suspension,” Artificial Organs, 32 (2008) 366-375 The MiTiHeart (MiTiHeart Corporation, Gaithersburg, MD, USA) left ventricular assist device (LVAD), […]
S. Jahanmir, A. Z. Hunsberger, Z. Ren, H. Heshmat, M. J. Tomaszewski, J. F. Walton, “Characterization of the New MiTiHeart LVAD Prototype,” Artificial Organs, 32 (2008) A1.
Jahanmir, S., Hunsberger, A.Z., Heshmat, H., Tomaszewski, M.J., Walton, J.F., Weiss, W.J., Lukic, B., Paw, W.E., Zapanta, C.M. and Khalapyan, T.Z. “Performance Characterization of a Rotary Centrifugal LVAD with Magnetic Suspension,” (May 2008) Artificial Organs, Blackwell Publishing Limited, Volume 32 (5), pp. 366-375. The MiTiHeart® LVAD, a third generation blood pump, is being developed for […]
S. Jahanmir, Z. Ren, A. Z. Hunsberger, H. Heshmat, M. J. Tomaszewski, J. F. Walton, “Status of the Magnetically levitated MiTiHeart LVAD,” ASAIO Journal, 54 (2008) 22A.
Jahanmir, S., Heshmat, H., Heshmat, C.A., Eryilmaz, O. and Erdemir, A. “Evaluation of DLC Coatings for Foil Bearing Applications,” IJTC2007-44035, Proceedings of ASME/STLE International Joint Tribology Conference, IJTC 2007, Part A, pp. 5-7, October 22-24, 2007, San Diego, California. A critical component in oil-free air foil bearings is the tribological coating system that must be […]
Ren, Z., Jahanmir, S., Heshmat, H. and Walton II, J.F. “Hybrid Magnetic Bearings for a Centrifugal Blood Pump,” IJTC2007-44199, Proceedings of ASME/STLE International Joint Tribology Conference, IJCT2007, Part B, pp. 997-999, October 22-24, 2007, San Diego, California. A hybrid passive/active magnetic bearing system was designed for a rotary centrifugal blood pump being developed for long-term […]
Hunsberger, A.Z., Jahanmir, S., Heshmat, H., Eryilmaz, O. and Erdemir, A. “Performance Evaluation of Half-Wetted Hydrodynamic Bearings with DLC Coated Surfaces,” IJTC2007-44207, Proceedings of ASME/STLE International Joint Tribology Conference, IJCT2007, Part A, pp. 241-243, October 22-24, 2007, San Diego, California, (2007) ASAIO Journal, 53, 31A. In conventional liquid lubrication it is assumed that surfaces are […]
Z. Ren, S. Jahanmir, A. Hunsberger, H. Heshmat, and J. Walton “Design and Performance Evaluation of a Hybrid Magnetic Bearing for a Rotary Blood Pump,” Proceedings of International Joint Tribology Conference, San Diego, CA, Oct 22-26, 2007, Paper No. IJTC20076-44199, ASME, New York.
Walton, J.F., II, Heshmat, H., and Tomaszewski, M.J., “An Oil-Free Motorized Turbocompressor For Fuel Cells,” Presented at 5th Fuel Cell Science, Engineering & Technology Conference, Jun 18 2007 – Jun 20 2007, Brooklyn, New York, United States.
A. Z. Hunsberger, Z. Ren, S. Jahanmir, H. Heshmat, M. J. Tomaszewski, J. F. Walton, “In Vitro Characterization of the Redesigned MiTiHeart LVAD,” ASAIO Journal, 53 (2007) 32A.
Heshmat, H., Walton II, J.F. and Heshmat, C.A. “On the Coupling of Foil Bearing Supported Rotors: Part 1 – Analysis,” ASME Paper GT2007-27821, Proceedings of the ASME Turbo Expo: Power for Land, Sea & Air, Volume 5, pp. 943-950, May 2007, Montreal, Canada. The expanded application of high-speed rotor systems operating on compliant foil bearings […]
Tomaszewski, M., Walton II, J.F. and Heshmat, H. “On the Coupling of Foil Bearing Supported Rotors: Part 2 – Experiment,” ASME Paper GT2007-27825, Proceedings of the ASME Turbo Expo: Power for Land, Sea & Air, Volume 5, pp. 951-960, May 2007, Montreal, Canada. The expanded application of high-speed rotor systems operating on compliant foil bearings […]
Heshmat, H., Jahanmir, S. and Walton II, J.F. “Coatings for High Temperature Foil Bearings,” ASME Paper GT2007-27975, Proceedings of the ASME Turbo Expo: Power for Land, Sea & Air, Volume 5, pp. 971-976, May 2007, Montreal, Canada. High operating speeds and temperatures required for advanced turbomachinery necessitate the development of bearings capable of continuous operation […]
Heshmat, H. and Jahanmir, S. “Evaluation of Coatings for a Large Hybrid Foil/Magnetic Bearing,” ASME Paper IJTC2006-12328, International Joint Tribology Conference, October 23-25, 2006, San Antonio, Texas, (2006). High operating speeds and temperatures required for advanced turbomachinery necessitate the development of bearings capable of continuous operation between 3 and 4 million DN at temperatures up […]
Hooshang, H., Tomaszewski, M. and Walton II, J.F. “Small Gas Turbine Engine Operating with High-Temperature Foil Bearings,” ASME Paper GT2006-90791, ASME Power for Land, Sea and Air, May 2006, Barcelona, Spain, (2006) Proceedings of the ASME Turbo Expo, Volume 5 (PART A), pp. 387-393. A 134 Newton thrust class, 120,000 rpm turbojet was redesigned to […]
Walton II, J.F., Tomaszewski, M.J., Heshmat, C.A. and Heshmat, H. “On the Development of an Oil-Free Electric Turbocharger for Fuel Cells,” ASME Paper GT2006-90796, ASME Power for Land, Sea and Air, May 2006, Barcelona, Spain, (2006) Proceedings of the ASME Turbo Expo, Volume 5 (PART A), pp. 395-400. Proton Exchange Membrane, fuel cells intended for […]
Heshmat, H., Tomaszewski, M., and Walton J. F.,”Small Gas Turbine Engine Operating With High-Temperature Foil Bearings,” Paper GT2006-90791, presented at the International Gas Turbine Institute Turbo Expo Conference, Barcelona, Spain, May 2006
Walton, J.F., II, Tomaszewski, M.J., Heshmat, C.S. and Heshmat, H. “On The Development Of An Oil-Free Electric Turbocharger For Fuel Cells,” Paper GT2006-90796, presented at the International Gas Turbine Institute Turbo Expo Conference, Barcelona, Spain, May 2006.
Heshmat, H. and Walton II, J.F. “Principles of Gas Turbine Bearing Lubrication and Design,” Chapter 7 in the “Handbook of Lubrication and Tribology”, Volume I, Application and Maintenance, Second Edition. Sponsored by the STLE and published in June 2006 by CRC Press, Taylor & Francis Group.
Heshmat, Hooshang “Compliant Foil Bearing Technology: An Overview.” Handbook of Lubrication and Tribology: Volume II Theory and Design. Second Edition. CRC Press, 2006. Air-lubricated foil bearings have demonstrated excellent promise for several applications such as air-craft air cycle machines, compressors, blowers, high-speed motors, gas turbines, turbochargers, and other high-speed turbomachinery. the foil bearing will deform […]
S. Jahanmir, H. Heshmat, Z. Ren, A. Z. Hunsberger, C. A. Heshmat, M. J. Tomaszewski, J. F. Walton, “Design of a Small Centrifugal Blood Pump with Hybrid Magnetic Bearings,” ASAIO Journal, 52 (2006) 54A. Design of a blood pump with a magnetically levitated rotor requires rigorous evaluation of the magnetic bearing and motor requirements and analysis […]
H. Heshmat, A. Z. Hunsberger, S. Jahanmir, M. J. Tomaszewski, J. F. Walton, “Prediction of Hydrodynamic Bearing Performance for Cardiac Assist Devices,” ASAIO Journal, 52 (2006) 51A Development of a reliable and efficient bearing system is one of the most critical challenges of long-term rotary mechanical circulatory support. Non-contacting hydrodynamic bearings offer superior performance to contact […]
From the standpoint of speed and pressure heads one can, in a general fashion, classify compressors as follows: Reciprocating – low speeds generating both moderate and high pressures Centrifugal – high speeds and moderate pressures Axial flow – very high speeds and low pressure This picture of compressor operation is portrayed in Figure 19.1. The […]
Heshmat, Hooshang, Walton, James F. II, Tomaszewski, Michael J., Cruzen, G. Scott and Rabe, Lavern, “A Turbojet Engine Demonstration with Air Foil Bearing,” Presented at the UVS Tech 2003, Royal Military Academy, Brussels, Belgium, December 3-5, 2003
NO. 6,965,181 | Hybrid foil-magnetic bearing with improved load sharing A hybrid foil-magnetic bearing wherein the foil and magnetic bearing parts share the load at predetermined speeds or operating conditions. Force, flux, strain, temperature, or acceleration sensors provide a measure proportional to actual load on at least one of the bearing parts, and this measure […]
Heshmat, H., Hryniewicz, P., Walton II, J.F., Willis, J.P. and Jahanmir, S. “Low-Friction Wear Resistant Coatings for High-Temperature Foil Bearings,” ASME Paper WTC2005-63684, ASME WTC 2005, September 12-16, 2005, Washington D.C., (2005) Proceedings of the World Tribology Congress III – 2005, pp. 399-400. Compliant foil bearings offer many advantages over rolling element bearings in high-speed […]
Heshmat, H. “Major Breakthrough in Load Capacity, Speed and Operating Temperature of Foil Thrust Bearings,” ASME Paper WTC2005-63712, ASME WTC 2005, September 12-16, 2005, Washington D.C., (2005) Proceedings of the World Tribology Congress III – 2005, pp. 111-112. This paper describes major breakthroughs in foil thrust bearings achieving a thrust load capacity in excess of […]
Heshmat, H., Heshmat, C., Valco, M.J., Radil, K.C. and Della Corte, C. “Foil Bearings Make Oil-Free Turbocharger Possible,” ASME Paper WTC2005-63724, ASME WTC 2005, September 12-16, 2005, Washington D.C., (2005) Proceedings of the World Tribology Congress III – 2005, pp. 113-114. This paper describes an oil-free, 150 Hp turbocharger that was successfully operated with compliant […]
Heshmat, H., Tomaszewski, M.J., Walton II, J.F. and Jahanmir, S. “High-Temperature, High-Speed Tribometer with Complex Motion,” ASME Paper WTC2005-63685, ASME WTC 2005, September 12-16, 2005, Washington D.C., (2005) Proceedings of the World Tribology Congress III – 2005, pp. 879-880. Complex motions and wide variations in relative surface velocities are likely to be experienced in mechanical […]
Heshmat, H., Hryniewicz, P., Walton J. F. Willis, J.P., and Jahanmir, S., “Low-friction Wear Resistant Coatings for High-Temperature Foil Bearings,” WTC2005-63684, Accepted for presentation at World Tribology Congress September 12-16, 2005, Washington, D. C.
Heshmat, H., Walton J. F., Tomaszewski, M., and Jahanmir, S., “Magnetically Suspended Rotary Blood Pump,” WTC2005-63681, Accepted for presentation at World Tribology Congress September 12-16, 2005, Washington, D. C.
Heshmat, H., Walton J. F. and Tomaszewski, M., “Demonstration of a Turbojet Engine Using an Air Foil Bearing,”Paper GT2005-68404 presented at ASME Turbo Expo, Land, Sea and Air, International Gas Turbine Conference, Reno, NV June 6-9, 2005 Selected for ASME 2005 IGTI Vehicular & Small Turbomachines Committee Best Paper Award
S. Jahanmir, J. P. Willis, J. F. Walton, H. Heshmat, W. J. Weiss, B. Lukic, W. E. Pae, and G. A. Prophet, “In Vivo Performance of a Magnetically Suspended Rotary Blood Pump Prototype,” ASAIO Journal, 50 (2004) 134.
Jahanmir S, Heshmat H, Tomaszewski M., Walton JF, Hunsberger AZ,Weiss WJ, Lukic B, Pae WE, Zapanta CM and Khalapyan TZ, “Status of Magnetically Suspended MiTiHeart LVAD,”, Presented at ASIAO Conference, Wasington, DC, June 2005 The MiTiHeart® LVAD is a non-pulsatile rotary blood pump that uses a hybrid passive/active magnetic bearing support system and exhibits low-hemolysis, […]
Awarded to Dr. Hooshang Heshmat
M. Kalin, S. Jahanmir, and G. Drazic, “Wear Mechanisms of Glass-Infiltrated Alumina Sliding Against Alumina in Water,” Journal of the American Ceramic Society, 88 (2005) 346-352. Glass-infiltrated alumina is now commonly used as a core material in dental restorations. If the veneer layer, which covers the core, is broken or damaged through use, a direct […]
G. D. Quinn, L. K. Ives, and S. Jahanmir, “Machining Cracks in Finished Ceramics,” Fractography of Advanced Ceramics, II, J. Dusza (Ed), TransTech, Zurich (2005) 1-13.
S. Jahanmir, “Wear of Ceramics: Wear Transitions and Tribochemical Reactions,” G. Stachowiak (Ed.), Wear – Materials, Mechanisms, and Practice, Wiley, West Sussex, UK (2005) 167-189.
Heshmat, H., Walton II, J.F., Tomaszewski, M.J. and Jahanmir, S. “Magnetically Suspended Rotary Blood Pump,” ASME Paper WTC2005-63681, ASME WTC 2005, September 12-16, 2005, Washington D.C., (2005) Proceedings of the World Tribology Congress III – 2005, pp. 611-612. MiTiHeartTM LVAD is a rotary centrifugal blood pump with a hybrid passive/active magnetic bearing support system. It […]
Heshmat, H., Hryniewicz, P., Walton II, J.F., Willis, J.P., Jahanmir, S. and DellaCorte, C. “Low-Friction Wear-Resistant Coatings for High-Temperature Foil Bearings,” (2005-2006) Tribology International, Volume 38, Issue 11-12, pp. 1059-1075. Compliant foil bearings offer many advantages over rolling element bearings in high-speed and high-temperature applications. However, implementation of foil bearings in these applications requires development […]
G. D. Quinn, L. K. Ives, and S. Jahanmir, “On the nature of Machining Cracks in Ground Ceramics: Part I, SRBSN Strength and Fractographic Analysis,” Machining Science and Technology, 9 (2005) 169-210. Machining cracks in ground sintered reaction-bonded silicon nitride (SRBSN) rods and bars were analyzed by fractographic techniques. Grinding flaw sizes were as small […]
G. D. Quinn, L. K. Ives, and S. Jahanmir, “On the nature of Machining Cracks in Ground Ceramics: Part II, Comparison to Other Silicon Nitrides and Damage Maps,” Machining Science and Technology, 9 (2005) 211-237. The size and severity of grinding machining cracks in a sintered reaction bonded silicon nitride from part I are compared […]